Safety Notes; Setting Up And Connecting - Monacor SOUND-100SUB Bedienungsanleitung

2 Safety Notes

This unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit uses dangerous mains
voltage . Leave servicing to skilled
personnel only . Inexpert han-
dling or modification of the unit
may result in electric shock .
•
The unit is suitable for indoor use only . Protect
it against dripping water and splash water,
high air humidity and heat (admissible ambi-
ent temperature range 0 – 40 °C) .
•
Do not place any vessel filled with liquid on
the unit, e . g . a drinking glass .
•
The heat generated inside the unit must be
dissipated by air circulation . Do not cover the
air vents (bass-reflex openings) .
•
Do not operate the unit or immediately dis-
connect the mains plug from the socket
1 . if the unit or the mains cable is visibly dam-
aged,
2 . if a defect might have occurred after the
unit was dropped or suffered a similar
accident,
3 . if malfunctions occur .
In any case the unit must be repaired by skilled
personnel .
•
A damaged mains cable must be replaced by
skilled personnel only .
•
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug .
•
For cleaning only use a dry, soft cloth; never
use water or chemicals .
•
No guarantee claims for the unit and no liabil-
ity for any resulting personal damage or mate-
rial damage will be accepted if the unit is used
for other purposes than originally intended, if
it is not correctly connected or operated, or if
it is not repaired in an expert way .
•
Important for U. K. Customers!
The wires in the mains lead are coloured in
accordance with the following code:
blue = neutral
brown = live
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
1 . The wire which is coloured blue must be
.
connected to the terminal which is marked
with the letter N or coloured black .
2 . The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red .
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harm-
ful to the environment .
3 Applications
This compact active subwoofer is used as a
low-frequency complement of existing audio
systems for hi-fi applications, home cinema and
home recording applications . It is equipped with
a 25 cm (10") bass speaker . Its amplifier offers a
peak output power of 200 W .
The subwoofer features an adjustable low
pass filter, a volume control, a phase reversal
switch and an automatic standby mode . The
integrated amplifier is provided with protective
circuits to prevent overload and overheating .
Inputs are provided for connection to stereo
outputs with line level and for connection to
speaker outputs (with feed-through facility for
the other speakers) .
The subwoofer also features an LFE input . In
multi-channel systems for cinema applications,
e . g . "5 .1", the LFE channel ("Low Frequency
Effect" or "Low Frequency Enhancement") is
used for low-frequency special effects .

4 Setting Up and Connecting

Set up the subwoofer on a flat surface . It is
not important to place the subwoofer exactly
in the middle between the stereo speakers as it
will not be possible to precisely locate the very
low frequencies reproduced by the subwoofer .
However, do not place it too close to walls or
in corners; this would distort the frequency re-
sponse and prevent the heat dissipation of the
integrated amplifier . Likewise, do not cover the
bass-reflex openings on the lower side .
Prior to making connections or changing
any existing connections, switch off the sub-
woofer and the units to be connected .
9