Burgbad Pli M1004 Montageanleitung Seite 22

BATHTUB PLI / INSTALLATION
1. Install pop-up waste and overfl ow set.
2. Adjust the bathtub
Installation of the panel (drain)
Assemble the individual components of the panel. The black installation clips engage and hold together
the components. Install the turning knob of the overfl ow set at the bore in the left side wall. Slide the
panel below the tap support and adjust it by means of the height-adjustable feet, if applicable.
Silicone
We recommend sealing the joints around the foot of the tub and around the panel with silicone.
Assembling the panel Height-adjustable feet of the
panel
Bathtub with panel
GB
43