Commands; Switching To A Particular Channel; Disconnecting From A Channel; Switching To The Next Channel - G&D DL-DVI-MUX4-NT Installation Und Bedienung

6. Enter or edit the following values:
Access:
Port:
Status:
7. Click on OK to save your settings and to close the window.

Commands

Switching to a particular channel

Use the command <connectmux>
switch.
The number of the channel you want to switch to is transferred as parameter:
SWITCHING TO THE THIRD CHANNEL
<?xml version="1.0" encoding="utf-8"?>
<root>
<connectmux>3</connectmux>
</root>

Disconnecting from a channel

The command <disconnectmux>
the KVM switch.
TERMINATING THE ACTIVE CONNECTION
<?xml version="1.0" encoding="utf-8"?>
<root>
<disconnectmux/>
</root>

Switching to the next channel

Use the command
<nextmuxchannel>
SWITCHING TO THE NEXT CHANNEL
<?xml version="1.0" encoding="utf-8"?>
<root>
<nextmuxchannel/>
</root>
Select the protocol ( TCP
munication via XML.
Enter the port to process XML communication.
Ports 80, 443 und 27996 are used for other services. They are
not available for XML control.
Define whether the configured access should be
.
disabled
to switch to a particular channel of the KVM
terminates the active connection of any channel of
to switch to the next channel of the KVM switch.
Controlling the KVM switch via XML
) or ( UPD ) to be used to process com-
G&D DL-DVI-MUX4-NT · 26
enabled or