Reverse Door - Klarstein 10030248 Bedienungsanleitung

• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit
on something solid
• so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It is better that 2 people handle the unit during assembly.
1. Unscrew hinge cover.
2. Open the door and unscrew the top hinge. Then take the
door from the cabinet and place it on a soft pad to avoid
damage.
3. Remove the cover and screws at left side and t them to
right side.
4. Carefully lie down the rear of cabinet on a soft pad. Remove
two levelling feet first. Then unscrew the door hinge and left
foot base.
Caution: If there is a screw at left front corner, remove
it before install hinge.

Reverse Door

18