Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To install the wheel, follow the removal procedures in reverse.
Before starting up the machine the front of the dust hood must be mounted
and secured by the screw (Fig. 12+13).
CAUTION:
• Be sure to tighten the hex bolt securely. Insufficient tightening of the
hex bolt may result in severe injury. Use the socket wrench provided
to help assure proper tightening. Always use only the proper inner
and outer flanges which are provided with this tool.
When mounting the diamond cutting discs, ensure that the
•
direction of rotation arrows on the diamond cutting disc match
with the rotation direction of the machine (see direction of
rotation arrow on the protective hood).
Use only original accessory!
•
The EST 350.1 is in power and speed optimal adjusted to the
•
EIBENSTOCK-diamond cutting discs.
In order to check whether the spindle stop is released before you
switch on the tool, turn the spindle slightly.
Let the machine run for a short period of time and in a safe position. If
the machine does not run easily, stop working immediately.
Dust Extraction
Dust which occurs during your work is hazardous to health. That is
why the EST 350 must be used with a vacuum cleaner, and a dust mask
has to be worn.
The suitable Wet/Dry Vacuum Cleaner DSS 25 ore DSS 50 is available as
accessory.
It can directly be attached to the connection on the dust hood (Fig.16).
Care and Maintenance
Before the beginning of maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced
personnel. After every repair the machine has to be inspected by an electric
specialist.
Due to its design, the machine needs a minimum of care and maintenance.
However, the following points always have to be observed:
Always keep the power tool and the ventilation slots clean.
During work, please pay attention that no particles get inside the
machine.
In case of failure, a repair has to be carried out by an authorised
service workshop.
22
Werbung
Inhaltsverzeichnis
