Siemens QAW740 Installationsanleitung Seite 23

Device address d
Note: When power is supplied to the room unit for the first time, an
automatic change to this display is made.
1. Press the Comfort button
free device address. If required, the sitting knob can be used to
make individual settings.
2. Press the presence button
same time, entry of the address will automatically be checked.
If the entry was wrong, repeat the procedure.
For more detailed information about the device address, refer to the
description of the Konnex bus system, Data Sheet CE1N3127.
Default
−
− Setting range
Installation Instructions
to start the search run for a
to conclude this setting. At the
255
1...255
74 319 0328 0 a - B1633
9