Setting Of An Automatic Standard Cooking Programme - Schneider EDOM - 34 Bedienungsanleitung

 Weigh the foods to be cooked ! You need the weight of the foods as the
automatic cooking programmes work with default quantities of weight. The
possible setting of the weight depends on the selected cooking programme (s.
tables, chapter 6.1 A
6.2 A
UTOMATIC STEAM COOKING PROGRAMMES
Using of automatic cooking programmes incl. preheating function (s. chapter
6.1 A
UTOMATIC STANDARD COOKING PROGRAMMES
 Do not place the foods to be cooked in the appliance at the beginning of the
operation but only when the preheating process is complete.
If you press the button
automatic cooking programmes, the defrosting programme will always be
activated first. Then you can switch between the automatic programme modes
(defrosting mode "d" / automatic standard cooking mode "P" or automatic
steam cooking mode "S") by pressing of the button
-
/ (I) repeatedly.
For cooking in the automatic cooking modes use microwavable ovenware only
(s. also chapter 7.2 S
chapter 7.3 U
NSUITABLE MATERIALS FOR MICROWAVE COOKING
WARNING! Do not use the appliance in the automatic cooking mode
when it is empty.
S
ETTING OF AN AUTOMATIC STANDARD COOKING PROGRAMME
1. Weigh the foods which you wish to cook.
2. The appliance must be in stand-by mode.
3. Press the button
4. The operational status indicator of the defrosting programme
display goes on. The indicator of the defrosting programme d 01, the default
initial weight and the corresponding defrosting time are displayed. The
operational status indicators corresponding to the defrosting programme (e.g.
microwave, etc.) go on as well.
UTOMATIC STANDARD COOKING PROGRAMMES
(H) in stand-by mode once to activate the
UITABLE MATERIALS FOR MICROWAVE COOKING
(H) in stand-by mode once.
)
):
(C) or the buttons
).
/ chapter
+
and
:
(8) on the
143