Alto Professional TX208 Benutzerhandbuch Seite 46

TX212
System Type
Drivers
Amplifier
Horn Coverage
Frequency Response
Crossover Frequency
Max SPL
Equalization
Connectors
Controls
Indicators
Power
Protection
Enclosure
Mounting/Installation
Dimensions
(height x width x depth)
Weight
46
2-way active ported loudspeaker
Low-Frequency: 12.0" (305 mm) driver, 2.0" (51 mm) voice coil
High-Frequency: 1.0" (25 mm) neodymium compression driver, 1.0" (25 mm)
voice coil
600 watts , 300
(peak)
90º horizontal x 60º vertical
70 Hz – 20 kHz
(-3 dB)
2.5 kHz
118 dB @ 1 m
Contour switch with low- and high-frequency +3 dB boost
(1) XLR/TRS 1/4" (6.35 mm) balanced input
(1) XLR output
(Link)
(1) IEC power cable input
Power switch, volume control knob, contour switch, ground-lift switch
(2) power LEDs (1 front panel, 1 rear panel), clip limiter LED
Connection: IEC
Voltage: 100 V, 110–120 V, or 220–240 V; 50/60 Hz, switchable
Fuse: 100–120V T4AL AC250V or 220–240V T2AL AC250V
Consumption: 260 W
Thermal, overload analog limiter/compressor
Injection-molded polypropylene, multi-angle for main or monitor
applications, metal grille, rubber feet, 2 handles
Standard 36 mm pole socket, wedge monitor
23.7" x 15.0" x 13.7"
602 x 381 x 348 mm
31.3 lb.
14.2 kg
, Class D power
(continuous)
(nominal)
(Line/Mic)
(both sides)