Charging Mp3 Player Or Mobile Phone During Playback - PERFECTPRO DAB+BOX2 Bedienungsanleitung

Charging MP3 player or mobile phone during playback

DAB+BOX2 is capable of charging a MP3 media player or mobile phone via USB slot during the
playback of MP3/WMA files via Aux In socket.
1. Press the Power On/Off button to switch on your radio. The red LED indicator is steady on.
Charging will only occur when the radio is switched on.
2. Connect USB cable (not included) between USB slot of DAB+BOX2 and I/O port of MP3
media player or mobile phone. USB can offer 5V 1A power to charge external device by AC
power source and only offer 5V 0,5A by battery power. The charging current limit is 5V 1A, if
the loading is over the limit, LCD display shows "Over Load!" and "Check USB Device".
Note:
1. It is recommended to use AC power to power the radio while charging MP3 media device or
mobile phone via USB slot. Though the battery is also able to charge the device, however
using the battery to charge the device will consume much energy and drain the battery easily.
2. The USB charging may not support the entire iPod and iPhone range.
3. Once the display shows "Over Load!" indicating it's over powered.
4. It's recommended not to use a portable hard disc as external device. It may easily over load
the radio.
5. The USB socket is suitable for DC power-out only and cannot be used for e.g. playback of mu-
sic from a USB stick.
Note:
Make sure the rubber cover of the USB socket is closed well after use to prevent moist and dirt
from entering the radio. Never use the USB socket in rainy or moist conditions to prevent moist
from entering the radio. Keep the rubber cover always closed under these conditions.
36
OVER LOAD!
CHECK USB DEVICE
1