Electrical Connection - Schneider WHS-22 Bedienungsanleitung

1. Push the closed appliance into the installation opening carefully.
2. Ensure that the power cable will not be trapped or kinked.
3. Ensure that the appliance is placed in the centre of the installation opening.
4. Open the drawer of the appliance (s. chapter 4.1 G
) and fix the appliance using the enclosed screws (s. fig below).
INFORMATION

3.5 Electrical connection

DANGER! The technical data of your energy supplier must meet the
data on the rating plate of the appliance.
WARNING! Turn off the power before you install the appliance and
before you connect it to the mains. RISK OF FATAL ELECTRIC SHOCK!
WARNING! Do not use an extension cord, socket strips or a multiple
socket.
WARNING! Connect the appliance to a properly grounded socket
only. Use a safety socket to minimize any risk of electric shock.
 The appliance is equipped with a power supply cable and a power plug.
 The appliance must be connected to a properly grounded socket only.
 Only use the power supply cable provided with the appliance.
 Do not modify the plug provided with the appliance, if it will not fit the outlet,
have a proper outlet installed by a qualified electrician (not covered by the
guarantee).
 When the power cord is damaged, it must be replaced by the manufacturer or
an authorized aftersales service or a qualified professional only.
 When the socket is not accessible for the user after the installation of the
appliance or a fixed electrical connection of the appliance is required, an all-pole
disconnecting device must be incorporated during installation. Disconnecting
I :
NSTALLATION
ENERAL OPERATIONAL
49