Device Information; Format Card; Usb Charge; Usb Audio - Philips PSE8000 Benutzerhandbuch

Device information

Display information about the device, such serial number, model
number and firmware version.  Display device information, p.
29.

Format card

Deletes all recordings and files saved on the device.  Memory
formatting, p. 29.

USB charge

Change the charging behavior of the device. If the USB port of
your computer does not supply enough power capacity (500
mA), charging may not be successful. Set the USB charge option
to Slow [100 mA] or Off and use an (optional) power supply.
• Fast [500 mA] (default)
• Slow [100 mA]
• Off

USB audio

When set to On, the device can be used as audio output device
for the computer when it is connected via the USB cable.

Hands-free mode

The recorder can be used for hands-free recording and tran-
scription by connecting the optional Philips foot switch LFH2210
to the docking station. In this operating mode, you can control
the recording and playback functions with the foot switch.
 Hands-free recording and transcription, p. 20.

Diagnosis file

Save a diagnosis file for error analysis and a file with all device
configuration settings on the memory card.
28 EN

Reset settings

Reset your settings to the factory default values.

Noise reduction

Turn on the noise reduction function for better playback quality.
Noise reduction reduces the background noise and improves the
intelligibility of quieter voices.