Stereo Mode; Bridge Mode - Omnitronic MCR-4250 Bedienungsanleitung

7.3 Stereo mode

The highest output power during stereo operation is achieved by connecting 4 speakers. With
8 speakers the output power will be slightly reduced. For stereo operation, use the positive "+" (red) and
the negative "+" (black) jack and set the STEREO/BRIDGE switch to "STEREO".

7.4 Bridge mode

In bridge operation the impedance of both speakers or the total impedance of the speaker groups must be at
least 8 and the power capability must be at least 450 W RMS. For connection, use the jacks BRIDGE (red)
and set the STEREO/BRIDGE switch to "BRIDGE".
33/40 00030070.DOC, Version 1.0