Activating The Camera; Starting The App - Telecom Behnke B-Smart Anleitung

3.2. Activating the camera

To use the B-Smart functions, you need to
enable this feature at the camera. After this
feature has been enabled, all camera configu-
rations will be made via your smartphone or
tablet. To enable this feature, please proceed
as follows:
1. Open the page: www.behnke-online.de/app
2. Enter the data you find on the supplement
marked „B-Smart set-up".
3. You will consequently receive access informa-
tion to use the B-Smart function.
www.behnke-online.com

3.3. Starting the app

Download the "TC Behnke" app from Apple's
AppStore or from Google Play, depending
on your type of smartphone or tablet PC. The
screenshots shown in the present instructions
were created on an iOS device. The app looks
exactly the same on Android devices. To open
the menu at the bottom of the screen, press the
Menu button on your Android device.
After starting the app you will see an empty
start screen.
To use the app with your B-Smart camera,
you first need to assign a user to the camera,
please cf. chapter "Camera Administration".
Then you need to add the door intercom, please
cf. chapter "Adding door intercom devices".
To do so, you will need the access information
provided during the user assignment process.
Please note: You cannot add a door intercom
using the administrator's access information.
As a first step, you need to assign a user to
the camera. In case you want to use B-Smart
functions outside your home network via a
mobile data connection, you need to activate a
corresponding license on our website.
Your door intercom set-up is successfully
completed.
Instructions B-Smart
Behnke B-Smart
GB
48