Altair 4 Kurzanleitung

Quick Start Card ALTAIR 4, ALTAIR 4X
Please review the back of this card for a detailed illustration
of the following components:
Button
• Turn the instrument ON with the
warm up and show info & setpoints.
• FAS: to accept press
• Page through screens with
Operation screen.
• ResetAlarm or PEAK and STEL values press
• To perform a Bump Check, press
• To Calibrate: ensure you are in fresh air and press the
button in Normal Operation mode for more than three
seconds.
• To activate / deactivate MotionAlert feature (if equipped),
page through screens until MotionAlert screen and press
button.
• Turn the instrument OFF by holding the
• For using Datalog: Most recent version of the MSALink
software available on MSA website has to be used.
This quick start card provides only a brief description of the
operating instructions for the ALTAIR 4 Multigas Detector
Alarm. The user of this instrument must be fully aware of the
limitations
instruction manual. Failure to follow the instructions may lead
to serious personal injury or death.
GB
Button
and instructions
Button
button. Instrument will
, to cancel press
button from the Normal
WARNING
supplied
.
on Bump page.
button.
in the
10092631/01 Y-HLR
button
operating