Inserting A Disk; Removing A Disk - Sony SFD-FW200P Bedienungsanleitung

Inserting a disk

Insert a HiFD/Floppy disk into the drive.
Before a floppy disk may be used, it must be formatted.
Commercially available pre-formatted 200 MB* HiFD or 1.44
MB/720 kB DOS disks do not need to be reformatted.
See Usable Floppy Disks on page 18 for compatibility details.
* 200 MB capacity, where 1 MB = 1 million bytes.

Removing a disk

Confirm BUSY indicator is not lit and press EJECT button.
Should disk not eject after pressing EJECT, contact Hotline
Support listed at the end of this manual.
HiFD/Floppy disk
BUSY
Indicator
EJECT
Button
17