Setting The Scsi Device Type - Sony UP-D70XR Gebrauchsanweisung

Setting the SCSI Device Type

You need to set the SCSI Device Type, if an error for IOS. VXD occurs when the
printer is connected to the computer with Windows 95.
Or, obtain the updated IOS. VXD device driver and install the device driver in your
computer.
1
2
3
4
While pressing the MENU button, turn on the power or the printer.
Check that the SCSI Device Type is set to the system used in the printer
window display.
When your compuer is Windows 95, SCSI DEVICE TYPE should be set to 3.
SCS I D e v i c e T y p e
< >
2 3
If the setting is incorrect, set to the SCSI DEVICE TYPE to 3 using the ı or ∫
button.
Turn off the printer.
The SCSI DEVICE TYPE is set to 3.
13
Preparation