Electromagnetic Fields (Emf); Preparing For Use - Philips NT5175 Betriebsanleitung

AA
- Remove the battery from the appliance if you are not going to use it
for some time.
- If the appliance is subjected to a major change in temperature, pressure
or humidity, let the appliance acclimatise for 30 minutes before you use it.
- For hygienic reasons, the appliance should only be used by one person.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic fields (EMF).

Preparing for use

1 To remove the battery compartment cover, turn it to clockwise until
the setting indicator points to the 'open' indication ( ^).
2 Pull the battery compartment cover off the handle.
3 Put the battery in the battery compartment.
Make sure the + and - poles of the battery point in the right direction.
Note: The appliance operates on one R6 AA 1.5-volt battery (included).
Preferably use Philips alkaline batteries. A new AA alkaline battery has an
operating time of up to 2 hours.
4 Slide the battery compartment cover back onto the handle.
ENGLISH
7