Creating Your Original Scene Templates - Yamaha RX-V365 Bedienungsanleitung

Selecting the SCENE templates
Creating your original SCENE
templates
You can create your original SCENE templates for each
SCENE button. Refer to the preset 12 SCENE templates
to create the original SCENE templates.
Customizing the preset SCENE templates
Use this feature to customize the preset SCENE templates.
Select the desired SCENE
template
SCENE template library
(Image)
1
Press and hold the desired dSCENE button
for 3 seconds.
The MEMORY indicator on the front panel starts to
flash.
3 seconds
Note
• When the SCENE template you want to customize is not assigned
to any of the dSCENE button, press ol / h repeatedly to
recall the desired SCENE template (see page 22).
24
En
Create an original SCENE
template
1
Assign the SCENE
template to the SCENE
button
1
2
Press ok / n to select the desired parameter
of the SCENE template and then ol / h to
select the desired value of the selected
parameter.
You can adjust the following parameters for a SCENE
template:
• The input source component
• The active sound field programs or STRAIGHT
mode
• The night listening mode setting (see page 20)
– SYSTEM: Keeps the current night listening
mode.
– CINEMA: Sets the night listening mode to the
CINEMA mode.
– MUSIC: Sets the night listening mode to the
MUSIC mode.
3
Press the iSCENE button again to confirm
the edit.
y
• An asterisk mark (*) appears by the name of the original SCENE
template.
• To cancel the procedure, press qRETURN.
Notes
• You can create a customized SCENE template for each dSCENE
button, and if you create another customized SCENE template, this unit
overwrites the old customized SCENE template with the new one.
• The customized SCENE template is only available for the assigned
dSCENE button.
1