Notes About Operation; General Notes - Trix Minitrix Köf II Bedienungsanleitung

Notes about Operation

• The first time the locomotive is used in a digital
system (Selectrix or DCC), the decoder must
be set for this digital system. To do this, the
decoder must be programmed once in this
digital system.
• The operating instructions for your central unit
will give you exact procedures for setting the
different parameters.
• The values set at the factory have been
selected to insure trouble-free operation.
• This locomotive comes from the factory
programmed for the digital address „01"
(Selectrix) / "03" (DCC).

General Notes

• It is not necessary to open up the locomotive
for normal maintenance work. Please see
your authorized Trix dealer or send the model
to the Trix Service Department for all other
repairs. Disassembling the locomotive will
automatically invalidate the manufacturer's
warranty.
• The locomotive body may warm up in ope-
ration. This is normal and is not a reason for
warranty claims.
• This locomotive has only a very limited pul-
ling power due to technical circumstances.
It may also have contact problems on certain
turnouts or combinations of turnouts.
• The operating instructions and the packaging
are a component part of the product and must
8
therefore be kept as well as transferred along
with the product to others.
• http://www.maerklin.com/en/imprint.html
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Trix have been installed in Trix products or
where Trix products have been converted in such a way
that the non-Trix parts or the conversion were causal to
the defects and/or damage arising. The burden of pre-
senting evidence and the burden of proof thereof, that
the installation of non-Trix parts or the conversion in or
of Trix products was not causal to the defects and/or
damage arising, is borne by the person and/or company
responsible for the installation and/or conversion, or by
the customer.