LaserLiner DampMaster Data Plus Bedienungsanleitung Seite 17

8
To save favourites
The moisture meter makes it possible to save the most frequently used materials as favourites. After selecting
the required material press and hold the „MODE" button. Then select the storage location with the arrow
buttons and confirm by pressing the „MODE" button. If there is a favourite already stored in the required
storage location it can be overwritten. Press the „MODE" button to confirm the overwrite or press the
„ON/OFF" button to cancel save/overwrite.
3 sec
9
To select/delete favourites
„Favourites" enables fast access to the materials saved by the user. Press the „MODE" button and use the
arrow buttons to select the „Favourites" menu item. Favourites that have already been saved can be selected
with the arrow buttons and confirmed by pressing „MODE". To delete a favourite, first select it and then press
and hold the „MODE" button. Press the „MODE" button to confirm or press the „ON/OFF" button to cancel.
10
Reference measurement
The reference measurement is a simplified form
of the comparison measurement in index mode.
The reference measurement sets a determined
measured value as the reference value and only
the differences from this value are shown on the
display. This method with its corresponding positive
or negative trend, makes it even easier to locate
and determine changes in the material moisture
content.
The Index mode is selected as described in Step 6.
By pressing the „ON/OFF" button, the currently
displayed value is set as the reference value. Press
the button again to deactivate this function.
DampMaster Data Plus
3 sec
17
GB