Before The First Use; Operating The Blender - Arzum SIESTA AR 184 Gebrauchsanweisung

• Remove its accessories when you perform the cleaning of your appliance.
• Make sure that the accessories are properly placed before operating your
appliance.
• Make sure that its engine completely stops before removing any accessory of
your appliance.
• Do not insert your fingers or any other object into the reservoir when your
appliance is in operation.
• Make sure that the reservoirs which you will use are properly placed before the
operation.
• Do not deactivate the locking mechanism by means of other tools.

BEFORE THE FIRST USE

• Read the instructions manual carefully.
• Wash in the foamy water, properly rinse and dry the decanter blender, steel
blade, sealing ring, lid and measuring cup before the use.
• Blending is a very rapid process. The engine operates the cutter at a high speed to
reach success for the blending process. When you operate the blender, make sure
that the appliance is placed on a flat, clean and dry surface.

OPERATING THE BLENDER

• You can make some delicious mixes and break ice into pieces with your blender
decanter.
• Firstly place the sealing ring on the blade unit.
• Assemble the blade unit onto the blade unit interface and screw the blade unit
interface onto the bottom of the blender jar until its fixed properly.
12
• Place the blender jar with the
blade unit interface attached on
the motor unit. You can also place
the blender jar on the motor unit
in two positions: with the handle
pointing to the right or to the left.
• Put the plug in the wall socket.
• Pour the liquids to
blended from the top.
NOTE: If you make any addition when the appliance is
in use, turn the cap in the middle of the blender cover
anticlockwise (to the left) and remove and make your
additions from there. After that replace the cover and
turn to the arrow direction " LOCK ".
WARNING: Use the measuring unit on the decanter
as a guide and limit the amount with maximum 1500 ml in order to prevent the
mixture to overflow.
• Place the cover and the cover stopper on the decanter.
• Make sure that the appliance is in the "0" position
and the electricity plug is
connected to the socket.
• Operate your appliance at
the desired adjustment for
several seconds by means of
using the control button or ıce crush button.
• Take it to the "0" position and control the food.
• Always switch off the appliance by setting the control knob to " 0 " off position
befoe you open the lid.
• Blending is a rapid process. Be careful to prevent the
foods to be blended excessively.
• Use the "PULSE" adjustment for more control in your
short blending operations. Take the control button to
the "PULSE" position to operate your blender and keep
pressed on this position for several seconds.
• The appliance will stop whenever you release the button.
be
13