j) Controlling the vehicle
Operate the throttle (13) very carefully and do not drive too fast at the beginning until you get used to
how the vehicle responds.
Do not make any fast or sudden movements with the throttle (13) or the control wheel (8).
If the vehicle shows a tendency to pull towards the left or the right, set the steering trim on the remote control accordingly
(see chapter 7, pos. 9).
When changing between forward and reverse, the throttle has to be in centre position (centre position = motor not
moving) briefly (approx. 1 second).
If the throttle is pushed from forward to reverse directly, the brake function of the drive is activated (vehicle will NOT
reverse!).
Examples:
1. Release throttle, vehicle rolls to a halt (or does not move)
2. Drive forward, pull the throttle towards the handle
3. Drive forward and then brake (vehicle slows down; does not roll to a halt slowly); push throttle away from the grip
without stopping
4. Drive forward and then reverse (wait briefly before changing direction, approx. 1 second!)
Wait briefly
35