Remington PRO-Ion Straight Bedienungsanleitung Seite 4

ENGLISH
F INSTRUCTIONS FOR USE
1 Before use, ensure the hair is clean, dry and tangle-free.
2 For extra protection use a heat protection spray.
, Hairsprays contain flammable material – do not use while using this
product.
3 Section the hair prior to styling. Style the lower layers first.
4 Plug the product into the mains power supply. Press and hold the on button
to switch on.
5 B When the styler is plugged in but not turned on a lock symbol will show
in the display window indicating the styler is in standby mode.
6 Start styling on lower temperatures first. Select appropriate temperature for
your hair type using the controls on the side of the product.
7 To adjust the temperature use the +/- temperature controls on the side of
the product. '+' increases the temperature '-' decreases the temperature.
150°C - 170°C
170°C - 200°C
200°C - 230°C
, Caution: the hottest temperatures should only be used by experienced
stylers.
8 The digital display will stop flashing when the product is ready to use.
9 Working on one section at a time, run the straightener through the entire
length of the hair without stopping.
10 The negative ions will be released onto the hair with every stroke.
11 Only repeat twice per section to prevent damage to the hair.
12 After use, press and hold the off button to turn off then unplug the
appliance.
, Temperature Boost Function
• Automatically sets the highest temperature. Hold the '+' button for 2 seconds
and the temperature will boost to 230°C.
Please note, the highest temperature is not suitable for every hair type.
•
Please select a temperature depending on your hair texture.
•
4
Temperature Hair Type
Thin/ Fine, damaged or bleached
hair
Normal, healthy hair
Thick, very curly and difficult to
style hair