Technical Data; Conformity; Operating Conditions; General Technical Data - bürkert 8022 Bedienungsanleitung

Type 8022
TechnicalData
6.

Technical DaTa

6.1.

conformity

The device is approved by EC and conforms to the standards mentioned on the EC declaration of conformity.
6.2.

Operating conditions

Ambient temperature (operating)
Protection class
Combined flow sensor
• Flow transmitter 8022
• Pulse divider 8022
6.3.

general technical data

6.3.1.

mechanical data

Dimensions
Fastening
• device without display and configuration unit
• device with display and configuration unit
Housing material
Material of the seals
• seal for the sensor fixed connector
• seal for the cover
6.3.2.

electrical data

Electrical connection
Supply voltage
Frequency input
-10 °C...+60 °C
IP65 according to EN 60529, the device being wired
and the cable gland tightened or the female connector
plugged-in and tightened
• only Bürkert flow sensors types 8020 Low Power, 8030
Low Power or 8070 Low Power.
• any flow sensor 8020 with pulse output, 8030 with
pulse output or 8070 with pulse output.
• 4-pin terminal strip, 1.5 mm
• M12 male fixed connector
V+ : 12-30 V DC +- 10%, residual ripple < 5%
1-600 Hz, sensor power supply approx. V+ - 1 V
70 x 32 x 42,5 mm (L x l x H)
• 1 M3 x 35 screw
• 1 M3 x 45 screw
polyamide/polycarbonate
• NBR
• EPDM
max. wire section, 6 - 7 mm cable diameter
2
English
9