Self Timer; Continuous Mode - AIPTEK PENCAM Installationsanleitung

Press the mode switch until "St" appears on the LCD. Then
press the shutter switch and a 10 second self-timer starts.
Every 10 second the camera issues a short beep. When
completing the self-timer, a longer beep sounds, which
indicates that a picture is taken.
Note: The self-timer can't work when the memory of your
camera is full.
Change mode to "St"
"St" is displayed
Press SW1 to initiate the self-timer mode
Press the mode switch until "Ct" appears on the LCD. You
can take a series of pictures in quick succession by holding
down the shutter switch. The function stops as you release
the shutter switch. If the "Ct" icon is not selected within 5
seconds, the LCD reverts back to the remaining number of
the pictures .
Note: Even if the light is insufficient, the continuous mode
still works. However, the pictures you shoot will be too dark
or too vague.
Change mode to "Ct"
"Ct" is displayed
Press SW1 to select Continuous mode

Self Timer

Continuous mode