Password Security; Setting Up Password Security For The First Time - Toshiba PX1267E-1G32 Bedienungsanleitung

Password Security

Setting up Password Security for the first time

Your Toshiba Drive came from the factory with Password Security
enabled, and programmed with a pre-set password. The first time
you connect the Drive to your computer, the login screen will appear.
If you want to keep Password Security enabled, follow the
instructions below to change the pre-set password. If you want to
disable Password Security, go to "Disabling Password Security" on
the next page.
How to change the pre-set password
1. In the login screen, click on the Options button.
2. In the Current Password field, enter 12345 (this is the password
that was set at the factory).
3. In the New Password field, enter your new password.
4. In the Confirm New Password field, enter the new password again.
5. In the Hint field, type in a word or short phrase that will help you
remember your password in the event that you forget what it is.
6. Click OK. You will see a message telling you to unplug and plug
in the device. Click OK, then unplug and plug in the USB cable
connected to your computer.
29