National Geographic BRESSER 9070200 Bedienungsanleitung Seite 20

symbol (A3) and the symbol of the comfort
level (A4).
3. Then the radio-controlled reception symbol
disappears.
4. In the display section 4, the measured values
of the internal sensor (Indoor) will appear.
5. If the values are not received from a channel,
'--' appears on the display, check the batteries
and try it again. Check if there is any source of
interference.
6. You can start the initialization manually.
7. Button function:
(1) CHANNEL / + button
A. Press it to select different display sections.
B. In setting mode, press it equals to UP.
C. Press and hold to enforce radio controlled
reception.
[1] press the CHANNEL/+ button until the
arrow (A7) appears on the desired channel.
20
Channel 1, 2 or 3, or IN for enforce a radio
controlled reception for all outdoor sensors
simultaneously.
[2] press and hold this button for 3 seconds to
search for signals from the desired outdoor
sensor.
[3] the radio-controlled reception symbol (A1)
appears.
[4] the basic station will scan the measurements.
[5] If the reception is successful, the display will
show temperature and humidity of the desired
outdoor sensor, the temperature trend symbol
(A3) and the symbol of the comfort level (A4).
[6] Then the radio-controlled reception symbol dis-
appears.
(2) MIN/MAX / - button
A. In normal mode, press and hold it more than 3
seconds to switch °C and °F.
B. Press this button, MAX appears on the display.