Checking The Control Functions - Reely SKY SlowFlyer Bedienungsanleitung



13. Checking the Control Functions

Before starting your model for the first time, you need to familiarise yourself with the control functions and test the model functions.
Switch on the transmitter first and connect the flight battery to the model.
Neutral Position:
When the control lever for the rudder and elevator function (see figure 2, item 5) is in the centre position, the rudder (1) and elevator (2) should be precisely at
the centre. If required, the trim buttons (also see figure 2, items 4 and 6) can be used to align the respective rudder precisely (see figure 7).
Elevator function
If the control stick for the rudder and elevator functions (see figure 2, item 5) is moved down, the elevator must deflect to the top. The rear rudder edge must be
deflected upwards by approx. 7 mm. In flight, the landing gear is pressed downwards and the model ascends (see figure 8).
If the control stick for the rudder and elevator functions (see figure 2, item 5) is moved up, the elevator must deflect down. The rear rudder edge must be deflected
downwards by approx. 7 mm. In flight, the landing gear is pressed upwards and the model dives.
This control function is required to put the model into a normal light position if it wants to ascend too much due to a control error or a gust of wind (see figure 9).
30
Figure 7
Figure 8
Figure 9