Adjustment Mode (Calib. Mode); Interface; Beep; Background Lighting And Lcd-Contrast (Lcd) - Mettler Toledo Densito 30PX Bedienungsanleitung

Menu (menu)
5.5

Adjustment Mode (Calib. Mode)

Off Adjust measuring cell with accompanying density standard or distilled
water.
On Adjust measuring cell with desired density standard.
The following input is required:
Density
Temp
α 1000
x
5.6

Interface

PRN Printer interface
Data transfer to the printer
Printer with serial interface and connected infrared adapter. Results are
formatted for output to a printer.
Transfer rate (baud rate), parity and stop and data bits must be config-
ured according to the peripheral device.
The following settings are required for the METTLER TOLEDO LC-P45
printer:
Baud rate
Parity
Stop bits
Data bits
RS Serial interface. The Excel macro "PortableCapt" for data transfer to the
computer via the infrared adapter is located on the HelloCD.
IrDA Data transfer to the PC with the integrated IrDA interface in accordance
with protocol 1.20.
5.7

Beep

Off Beep off.
On Beep on.
5.8

Background Lighting and LCD-Contrast (LCD)

Backlighting
The backlighting is turned off automatically 5 seconds after the last time a key
has been pressed (Auto off), or it is always off (Always off).
Contrast
Display contrast is adjustable to one of 9 levels with the
5.9

Automatic Switch-off (Power)

Off Automatic switch-off off. The instrument must be switched off manually.
On The instrument switches off automatically if not operated for 10 minutes.
5.10

Software Version (Version No.)

The software version is displayed.
12
Density of the density standard (g/cm
reference temperature.
Reference temperature
Temperature-compensation coefficient of the
density standard
9600
none
1
8
1000
•
METTLER TOLEDO Densito 30PX
3 ) at the
keys.