Insulation Testing Concepts - Megger BM81/2 Gebrauchsanleitung

Insulation Testing Concepts

Insulation resistance can be considered by
applying Ohm's Law.
resistance is determined from the applied
voltage divided by the resultant current,
R =
There are two further important factors to be
considered. These are:
(i) the nature of the current through
and/or over the insulation, and:
(ii) the length of time for which the test
voltage is applied. These two factors
are linked.
The total current that flows is made up of three
separate currents:-
1) Capacitance charging current. This current
The measured
2) Absorption current. This current is also
V
I
3)
(a) A current flowing along conduction paths
(b) A
As the total current depends upon the time for
which the voltage is applied, Ohm's Law
theoretically
The charging current falls relatively rapidly as
the equipment under test becomes charged
up. The actual length of time depends upon
the size and capacitance of the item under
test.
Larger items with more capacitance will take
is initially high and drops as the insulation
becomes charged up to the applied
voltage.
initially high but drops at a much slower
rate than the charging current.
Conduction or Leakage current.This is a
small steady current that can be sub-
divided into two:-
through the insulation material.
current flowing along
paths over the surface of the insulation
material.
applies at
conduction
infinite time.
12