Sliding The Appliance Into The Installation Niche - Gaggenau RC 462 Montageanleitung

11. Sliding the appliance into the installation niche

Note:
If the floor or appliance is skew in relation to the
installation niche, the height adjustable wheels should be
correspondingly adjusted before sliding the appliance
into the niche.
Plug the mains plug into the socket.
D
Note:
A separate plug is necessary for each appliance in the
case of side by side set up!
Protect the mains lead from getting wedged under or
D
behind the appliance.
Recommended procedure:
Tie a rope onto the middle of the mains lead and slide
the appliance forwards. Pull the cable onto the rope
when sliding the appliance into the niche.
or
Fasten the mains lead onto the floor with adhesive
tape, in the middle behind the appliance approx.
38 cm from the rear of the niche.
Slide the appliance carefully into the niche until the
D
height adjustable wheels grip into the anti tilt
mechanism.
66
!
Warning!
Be careful when sliding the appliance into the
installation niche. The water connection or mains
fixed on the floor could be damaged.
Remove the edge protector of the installation niche.
D