FM scanning mode
You can choose whether Evoke automatically stops at the next available FM station or the next available FM
station with a strong signal when scanning for an FM station. To change the FM scan setting:
1.
Press the Menu button.
2.
Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'FM Menu'.
3.
Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Scan
Setting'.
4.
Turn and press the Select dial or use the <Select> buttons on the remote control to choose
between one of the following options:
All Stations: Choose this option to change the scan setting to automatically stop at the next available
FM station.
Strong Station: Choose this option to change the scan setting to automatically stop at the next
available FM station with a strong signal.
System settings
Carrying out a factory reset
Resetting your Evoke removes all presets, stored stations, alarms and resets all other options to default
settings.
1.
Press the Menu button.
2.
Turn and press the Select dial to choose 'Settings'.
3.
Turn and press the Select dial to choose 'Factory reset'.
4.
Turn and press the Select dial to select 'Yes' to reset Evoke to factory settings. Select 'No' if you do
not want to reset your Evoke to factory settings.
Displaying the firmware version
To display the firmware version:
1.
Press the Menu button.
2.
Turn and press the Select dial to choose 'Settings'.
3.
Turn and press the Select dial to choose 'Firmware'.
4.
Turn and press the Select dial to display the 'DAB' or 'MCU' firmware version.
Changing your preferred language
You can select the language that your Evoke uses for menus and options.
1.
Press the Menu button.
2.
Turn and press the Select dial to choose 'Settings'.
3.
Turn and press the Select dial to choose 'Language'.
4.
Turn and press the Select dial to select a menu language from 'English', 'Français' (French),
'Deutsch' (German), 'Italiano' (Italian), or 'Español' (Spanish).
18