LD Systems LAX16D Bedienungsanleitung Seite 17

INSERT CONNECTION
When connecting external signal processors via the main insert on the mixer, one TRS cable is required for each
send/return. The configuration of this so-called "Y" cable is depicted below.
FOR 6.3 MM STEREO PLUGS (TRS INSERT)
INSERT CABLE
Send
Return
Tip
Ring
Sleeve
NO. PRESET
00-09 Echo
10-19 Echo+Verb
20-29 Tremolo
30-39 Plate
40-49 Chorus
60-69 Rotary
70-79 Small room
80-89 Flanger Verb
90-99 Large hall
WIRING CONFIGURATION / PRESET LIST:
TIP RING SLEEVE
TIP RING SLEEVE
TIP RING SLEEVE
DESCRIPTION
The input signal is sent to the output with a time
delay
Echo with room effect (hall)
Amplitude modulation of the signal
Hall effect: Simulation of a classic vocal plate
reverb effect (adds brightness)
Creates the illusion of multiple instruments (voices)
on the basis of a single signal
Simulation of typical rotary speaker effects incl.
bass box
Hall effect: Simulation of a bright studio room effect
Combination of a modulated delay effect plus hall
Hall effect: Simulation of a large room
Tip
Ring
SLEEVE TIP
Sleeve
SLEEVE RING TIP
Tip
Ring
Sleeve
Tip
Ring
Sleeve
PARAMETER
Delay time: 145-205 ms
Delay time: 208-650 ms Decay time:
1.7-2.1 s
Rate : 0.6 Hz-
Decay time: 0.9s~3.6s
Rate : 0.92Hz ~1.72Hz50-59
Modulation depth : 20%~80%
Decay time: 0.7~2.1s
Pre-delay : 20~45ms
Decay time: 1.5~2.9s
Rate : 0.8Hz ~2.52Hz
Pre-delay : 23~55ms
Tip (Send)
Sleeve
Tip (Return)
Sleeve
1
2 (Send)
3
1
2 (Return)
3
Centre (Send)
Screen
Centre (Return)
Screen
17