Denver Instrument Summit S-114 Betriebsanleitung Seite 9

Connecting Electronic Peripheral Devices
§ Make sure to unplug the balance from AC
power before you connect or disconnect a
peripheral device (printer or computer) to or
from the interface port.
Warmup Time
To ensure accurate results, the balance must
warm up for 30 minutes before operation.
Only after this time will the instrument have
reached the required operating temperature.
Using Verified Balances in Legal Metrology in
the EU*:
$ Make sure to allow the equipment to warm
up for at least 24 hours after initial connec-
tion to AC power or after a relatively long
power outage.
Operation Outside the Temperature Range
! Operating the balance beyond the tempera-
ture range of +10...+30°C (50°...86°F).
Differences from the specifications listed in
the chapter on "Specifications" are possible.
* Including the Signatories of the Agreement
on the European Economic Area
9