• Blumax Bluetooth GPS-4013 Receiver uses Lithium bat- • For safety, keep the Blumax Bluetooth GPS-4013 Receiver tery. If Blumax Bluetooth GPS-4013 Receiver is used in tem- and all accessories out of small children’s reach� perature lower than -10°C or higher than 60°C, its battery charging capability will decrease�...
Before you begin Main features: Thank you for purchasing the Blumax Bluetooth GPS-4013 Receiver, a global positioning system receiver with Blue- tooth wireless technology. Blumax Bluetooth GPS-4013 Re- • Semi indoor fixed ceiver is well suited to system integrations including PDA, •...
Charging your battery Checking the package content For the 1st time you use the Blumax Bluetooth GPS-4013 Thank you for purchasing Blumax Bluetooth Wireless GPS- Receiver, please charge battery until it is full. Take the pow- 4013 Receiver with 66-Channels. It supports ultra high sen-...
Switch off GPS function in your PDA/Smart phone/PC, then ceiver for paring and check the Bluetooth connection will be disconnected automatical- if your device is equipped ly. Then put Blumax Bluetooth GPS-4013 Receiver power with Bluetooth function� If switch to “OFF” position. not, you may need to ac- quire an optional CF/SD Bluetooth card or Bluetooth dongle�...
Quickly GPS position is fixed, Blinking: Navigation AGPS Before you use GpsView software, you need to install Blumax Bluetooth GPS-4013 Receiver driver. (Install InstallDriver. exe driver for USB port from CD-ROM) - 12 - - 13 - Blumax Bluetooth GPS-4013 Receiver...
COM port of other device that is the device is being being used� used Can not find out Blumax Re-Start PDA or Bluetooth Poor connection PC and re-install GPS-4013 software� Receiver - 16 - - 17 - Blumax Bluetooth GPS-4013 Receiver...
Driving under tunnels or in buildings may affect signal recep- of battery to right side tions� • Low battery of a PDA or of an Blumax Bluetooth GPS-4013 Receiver may affect signal receptions. • Please check the correct “COM” and “Baudrate” of your PDA. •...
Directive (73/23/EEC) and the Amendment Directive (93/68/ damages, or loss of use. EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. - 22 - - 23 - Blumax Bluetooth GPS-4013 Receiver...
Seite 13
Überprüfen Sie den Lieferumfang ���������������������30 Den Akku aufladen ��������������������������������������������31 Erste Schritte �����������������������������������������������������32 Funktionsweise der Energieverwaltung �������������34 Weitere Funktionen �������������������������������������������34 GPS-4013 AGPS ����������������������������������������������������������������34 Allgemeine Merkmale ����������������������������������������37 Fehlersuche �������������������������������������������������������38 Spezifikationen ��������������������������������������������������40 Appendix A� Batteriewechsel �����������������������������42 - 24 - - 25 - Blumax Bluetooth GPS-4013 Receiver...
öffnen. Dabei könnten Sie das Gerät beschädigen und die Garantie verlieren� • Wenn Sie Ihren Blumax Bluetooth GPS-4013 für längere Zeit nicht benutzen möchten, nehmen Sie den Akku heraus und la- gern Sie ihn an einem kühlen und trockenen Ort�...
Vor dem Gebrauch Haupteigenschaften Vielen Dank, dass Sie sich für den Blumax Bluetooth GPS-4013 entschieden haben – einen GPS-Empfänger mit drahtloser Blu- etooth Übertragungstechnik. Der Blumax Bluetooth GPS-4013 • Semi-Indoor-Empfang kann auf vielfältigste Weise verwendet werden, zum Beispiel • AGPS möglich mit einem PDA, Smartphone, Tablet-PC oder einem Notebook.
Den Akku aufladen Überprüfen Sie den Lieferumfang* Bevor Sie den Blumax Bluetooth GPS-4013 zum ersten Mal Vielen Dank, dass Sie sich für den Blumax Bluetooth GPS- verwenden können, laden Sie bitte den Akku vollständig auf. Empfänger 4013 mit 66 Kanälen entschieden haben� Er Dafür stecken Sie das Ladekabel in den Zigarettenanzünder...
Bitte beachten: In einigen Kartensoftwares, wie z. B. der einen USB-Bluetooth-Stick. vom TomTom, müssen Sie in den Einstellungen “Anderes Zum Paaren schalten Sie bitte zuerst den Blumax und dann Bluetooth GPS-Gerät” einstellen (je nach Gerät und Soft- das Bluetooth an Ihrem Computer ein�...
Baudrate und den COM-Port→klicken Sie „Weiter“ an� Weitere Funktionen AGPS Bevor Sie die GPSView Software verwenden, müssen Sie einen Treiber für den Blumax 4013 installieren� (Die Datei InstallDriver.exe für den USB - Treiber finden Sie auf der CD-ROM) - 34 - - 35 -...
Blumax Bluetooth das schwache COM-Port wird schalten Sie die werden. GPS-Empfänger GPS-Signal zu bereits von einer andere Anwendung 4013 kein oder verstärken� anderen Anwend- ab� nur ein schwaches ung benutzt� GPS-Signal. - 38 - - 39 - Blumax Bluetooth GPS-4013 Receiver...