B) Remove And Replace The Front Control Panel - Renkforce HEADUNIT CD-3994 Bedienungsanleitung

0 ENGLISH
. Mechanical Installation

B) Remove and Replace the Front Control Panel

The front control panel can be removed to prevent theft.
• Before you remove the front control panel, press the
• Press the REL button (16) and remove the control panel by pulling it out as illustrated in the picture on
the right.
• For replacing the control panel, place the left side into the front of the unit as illustrated in the lower
picture and press slightly onto the right side of the front control panel until it locks.
• Do not press on the display or the buttons.
Version 0/07
Make sure to insert the front control panel in the correct way.
Do not press the front too much against the unit. You can easily put it back by pressing slightly
on the device.
When you remove the front control panel, please put it into the supplied protective cover.
button (22) to turn the product off.
Refer to page