4. Trans port
4.2 Load ing and trans por ta tion
De ath ha zard from sus pen ded lo ad!
•
It is for bid den to
–
walk un der sus pended loads,
–
stand un der sus pended loads,
–
ride on sus pended loads.
•
En sure that no per sons will be en dan gered.
•
Only use suf fi ciently strong and se cure load ing
ramps when load ing.
•
Check the con tact points (frame, lift ing rings)
be fore use for dam age and wear. Im me di ately re -
place dam aged parts.
•
Se cure the ma chine against roll ing or slip ping
off and against tip ping over.
•
When load ing, lash ing down and lift ing the ma -
chine al ways use the pro vided lift ing points.
•
Af ter loa ding, lock or re mo ve the draw bar.
4.2.1
Re move the drawbar
In ju ry ha zard!
•
Do not op er ate the ma chine with out the drawbar.
•
Af ter trans port, pro per ly in stall the draw bar
again.
The drawbar can be re moved for easy trans port:
•
Re move the pins (1).
•
Pull the drawbar (2) out wards and re move it.
•
In sert the pins (1) back into the holes to se cure them against
loss.
48