Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9. Operation
a) Operating Buttons at the „Grand Video Console Plus II"
The buttons are used to control the main functions of the device. Special functions can be operated by the included IR
remote control.
If the VGA input is activated, some buttons have no function!
„MENU" button
„UP/DOWN" button
„ENTER" button
„SOURCE" button
„PC/SEL" button
b) IR Remote Control
If the VGA input is activated, some buttons have no function!
1 „Resolution" button: Switch resolution for VGA output
2 „Reset" button: Create basic settings
3 Buttons „PC", „Video", „S-Video": Switch input
4 „Menu" button: Open OSD (On-screen menu/Settings menu)
5 „Exit" button: Leave function or settings menu
6 Buttons „", „", „" and „": Select function in the settings menu or
adjust settings; move the image in POP mode
7 „ENTER" button: Function selection
8 „Sport" button: Select pre-settings for input signal with fast motion in the
video signal (e.g. for video games)
9 „Static" button: Select pre-settings for input signal with few or no motions in
the video signal (e.g. for PC operation)
10 „VOL+" and „VOL-" buttons: Increasing/reducing the volume
11 „60Hz" and „75Hz" buttons: Switch refresh rate
12 „mode", „move", „source" and „audio" buttons: Control buttons for picture-in-picture function
Open OSD (on-screen menu): A menu is displayed on the screen that can be used to make
several settings, e.g. brightness, contrast, volume or resolution of the VGA output.
Select function in the settings menu or change settings (or adjust volume if the settings
menu is not active)
Selection of a function
Switch input signal „VGA", „S-VIDEO" or „VIDEO"
Activation/Deactivation of the „Grand Video Console Plus II"
If the device is switched off,the red LED on the top goes out, and the VGA input „PC IN"
is passed through to the VGA output „VGA OUT".
23
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
