MC Crypt IN THE MIX Bedienungsanleitung Seite 38

(17) Display
The display shows the most important settings and information for the playback medium.
(18) TAP button
Button for determination of the BPM (beats per minute).
(19) Ejection button
Press this button to eject a CD.
(20) VINYL button
Activate the SCRATCH function (VINYL function) with this button. You can now scratch the selected track
with the JOG wheel (2) in PLAY or PAUSE mode like on a record player.
(21) PITCH slide control
With the PITCH slider, you can change the playback speed by +/-16%.
(22) FOLDER rotary control
Use this rotary control to select any FOLDER on the selected playback medium.
(23) TRACK rotary control
Use this this rotary control to select any TRACK within a FOLDER.
(24) CD loading tray
Put your CD to be played in here. Always insert the CD with the printed side up.
(25) CUE MODE switch
SPL MONO:
If the switch is set to SPL MONO, the CH1 signal is fed to the left headphone and the CH2 signal is fed to
the right headphone in mono.
STEREO:
If the switch is set to STEREO, both headphones play the master signal in stereo.
(26) Input selection switches LINE/PHONO or CD/USB/SD
You can use the input switch to select between the individual inputs (signal sources) for the channel. The
selected signal source is fed through this mixer channel.
Minimise the volume using the corresponding channel fader before switching an input selec-
tor. Possible volume differences between the input sources may otherwise cause sudden
excessive volume.
(27) GAIN control unit
Using the GAIN control, you can set the sensitivity of the channel. The different heights of the signals of the
two channels can thus be pre-amplified and adapted to one another.
37