Track Loading; Time Display; Fader Start - Numark iDJ2 Referenzhandbuch

TRACK LOADING

Choose how you want songs loaded and played from the Crate.
Manual
Tracks are loaded to deck manually, by you. When
songs are finished they return to the start and pause.
Automatic
The next song (at the top of the Crate) will be loaded
to deck, and cued at the start.
Continuous
Like Automatic, but the next song will automatically
start to play.
Cyclic
Like Continuous, but after each song has played it is sent back to the bottom of the Crate, creating a
never ending sequence of playback.
For the modes which automatically load the deck, the following conditions must be met for iDJ² to load the
next song:
The previous song has fully played out - or - The previous song is paused having played more than 75% through
This is to prevent automatic loading while you're cueing or mixing on the deck.
Tip: For continuous looping play of a collection of songs, send your collection to the crate then choose
Cyclic from the list of Track Loading options. This works for either or both decks at once! The songs
will play continuously from the crate until you pause the decks.

TIME DISPLAY

Set the time code display mode.
Elapsed
Display time elapsed (count up) on the deck.
Remaining
Display time remaining (count down) on the deck.

FADER START

Fader Start allows you to start playback on either deck directly from the crossfader. With this feature, every
time you move the crossfader toward either side, the track loaded on that deck will begin playing.
Off
Ignore fader start signals.
Cue
Return the play position to the cue point and pause after fading away from the deck. Resume
playback when starting to fade back toward the deck.
Pause
Similar to Cue, but pauses at the current position instead of the Cue point.
30