Troubleshooting; Cleaning And Maintenance - Sonnenkönig VENUS Bedienungsanleitung

Remote Control
1 PLUG the unit into a plug socket, make sure the power supply is the same as rated
2 PRESS the power button on the right side of heater
GB
3 TURN ON the heater by remote control, or off the heater
4 DOWN & UP BUTTON, setting the power level

5. Troubleshooting

1. If heater will not power cord is plugged into an electrical outlet, if not, plug in.
2. Check if electricity to the main fuse is working
3. Check to see it the thermostat knob to the ON position
4. Check the thermostat setting, The heater may be off because it has reached the desired
temperature setting

6. Cleaning and maintenance

Regular and careful cleaning helps your infrared heater operate efficiently for many trouble free
years. To clean your heater follow steps below
1. Unplug the power cord for your safety before cleaning your appliance.
2. Make sure the heater is cool before continuing
3. To keep the heater clean, the outer shell maybe cleaned with a soft, damp cloth. You may use
a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. (CAUTION: DO
NOT let liquids enter the heater)
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean
the heater. This may cause damage or deterioration to the surface of the heater.
5. DO NOT immerse the heater in water
6. Wait until the heater is completely dry before use.
Storage: Store the heater in a cool, dry location when not in use to prevent dust and dirt build
up. Use packaging carton to store.
42