Conrad KA-5601A Bedienungsanleitung Seite 4

5,6" TFT Color Monitor with remote control KA-5601A
The "Instructions for Use" are a part of this product. They contain important information for the startup and
handling of this product. Please observe these instructions, even if you give this product to third parties.
For this reason, it is recommended that you keep the instructions for use for future reference.
Introduction
Dear customer,
Thank you for your purchase of this TFT color monitor. This product has been tested in accordance with the relevant
EU guidelines for electromagnetic compatibility and complies with the statutory provisions.
Intended use
The TFT color monitor with remote control serves as a screen for video surveillance systems, door intercom systems, or for
the reproduction of images and sound from video recorders or camcorders. The video playback is in color, the audio
playback in mono. As the power supply, only 12 V direct-current voltage may be used, for example the supplied wall power
supply unit. The power supply unit is only suitable for operation with a common household power socket for the 230 V / 50 Hz
public mains supply grid. The use of the monitor is only permitted indoors, not outdoors. Any contact with humidity, for
example in the bathroom, must be avoided under any circumstances.
The product in its entirety must not be modified or converted!
It is imperative to observe the safety information!
Safety and hazard information
•
The power supply unit is built pursuant to protection class II.
•
Only a 230 V / 50 Hz (10/16 A) power socket of the public mains supply grid may be used as a power source for this
device.
•
Only the power supply unit included with the monitor may be used as a power source for the product.
•
Make sure that all electrical connections, connecting cables between the appliances, and extension cords, if any, meet
the applicable regulations and are consistent with the instructions for use.
•
Please consult an expert if you have any doubts regarding the operation, safety or connection of this device.
•
When opening covers or removing parts of the unit, except where this is possible by hand, live components may be
exposed. Connection points may also be a live voltage. Prior to service or maintenance activity, repair or replacement of
components or assemblies, the device must be disconnected from all voltage sources, if it is necessary to open the unit.
If a service or repair on the open, energized unit is unavoidable, it may only be performed by a specialist who is
thoroughly familiar with the existing hazards and the pertinent regulations.
•
Capacitors in the device may still be charged, even if the unit has been disconnected from all voltage sources.
•
The power supply unit must never be plugged in or unplugged with wet hands.
•
Do not pull on the cable of the power supply unit. Unplug the unit from the power socket only by pulling on the plug
housing.
•
Make sure that the power cables are not crimped or damaged by sharp edges when installing or assembling the device.
•
If the monitor is not being used for an extended period of time, it is suggested to unplug the power supply unit from the
mains outlet.
•
Always unplug the power supply unit before cleaning the device.
•
As a safety precaution, the power supply unit should be unplugged from the power socket during a thunderstorm.
•
If it can be assumed that a safe operation is no longer possible, then the device must be switched off and preventive
measures against an unintentional operation must be taken.
•
A safe operation can no longer be assumed if:
- a device or the AC power line shows visible signs of damage,
- the device no longer works properly,
- after the device has been stored for an extended period of time under adverse conditions,
- following severe transportation stress.
•
Keep children away from electrical appliances.
•
Never pour any liquid over electrical appliances. This results in an extremely high risk of fire or perilous electrical shock.
If such an incident should nevertheless occur, unplug the power supply unit from the power socket immediately and
consult a specialist.
•
Never put the appliances into operation immediately after they have been brought from a cold room into a warm room.
The condensation water that develops in this situation might destroy the appliances.
Instructions for Use
Order No.: 75 58 61