Led Panel; Sd Card Backup - Intenso Memory 2 Move Pro Kurzanleitung

9.3 LED PANEL

Power LED:
LED Off:
-
Green Color:
Off:
-
- Slowly Blinking:
- Blinking Fast:
Red Color:
- Steady Light:
- Blinking Fast:
HDD LED:
- Blinking:
- Steady Light
LED off
-
Wi-Fi LED:
- LED Off:
Blinking blue:
-
Steady blue Light:
-
Internet LED:
LED Off:
-
- Blinking green:
- Steady green Light:

10. SD CARD BACKUP

Please carry out the following steps to backup the data saved on your SD card on Memory 2
Move Pro.
1.) Please start Memory 2 Move Pro and wait for the appliance to be ready for use.
2.) Insert the SD card into the Memory 2 Move Pro card slot.
3.) Now shortly press the power bottom twice to start backup.
Indication: As long as the white LED of Memory 2 Move Pro flashes, your data are copied
from the SD card to the memory of Memory 2 Move Pro. Please do never remove the SD
card from the appliance during an active backup. This can cause damages and subsequent
data losses.
The device is switched-off or no power
Battery is fully charged
Battery charging
Device Shutting-Down
Less than 30% available power
Will soon shut-down, must be charged
immediately
Read/Write activities
Connected with PC
HDD is in sleep mode
The device is switched-off or no power
Starts the Initialization process
Initialization process completed
Ready to use, Wi-Fi signal is normal
No internet connection
establishing connection
Connection established
EN- 7