Cleaning And Maintenance; Safety Information; Cleaning - CASO DESIGN Café Crema One Original Bedienungsanleitung

14 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.

14.1 Safety information

Attention
Please observe the following safety notices, before you commence with cleaning the
device:
► The device must be cleaned at regular intervals and calcium deposits should be
removed.
► Switch the device off prior to cleaning it and unplug the plug from the wall power outlet.
► During operation the outlet, steam nozzle, brewing unit, coffee grounds container and
drip trays can get hot! Wait until the appliance has cooled down.
► An appliance that is not kept in a clean state can have a negative impact upon the
service life of the appliance and can lead to a dangerous condition of the appliance as
well as fungal and bacterial contamination.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
► For the descaling, use only the enclosed descaling agent or original CASO descaling
agent. Using the wrong descaling agent could damage the appliance and cause you to
lose your warranty claims.
► Clean the appliance and empty it completely if you are not going to use it for a long
time.
► Change the water every day so that no germs can form.

14.2 Cleaning

Empty the drip try, drip grid, inner drip tray, coffee grounds container and the water tank
every day and clean it under running water. Thoroughly dry them following this.
back on. Assemble the appliance once more.
Warning
► Do not clean the device when it is hot.
► Never put the device (besides above mentioned parts) into water or under running
water.
Open the cover cap of the brewing unit. Press the unlocking
buttons (orange) of the brewing unit together and remove the
brewing unit from the appliance. Rinse the brewing unit under
running water and thoroughly dry it. Wipe the interior behind the
cover cap of the brewing unit with a damp cloth and then dry it.
Insert the brewing unit correctly once more. Put the cover cap
53