Using The Wall Bracket - Technaxx Nature Wild Cam TX-69 Gebrauchsanleitung

Night Mode
 During the night, the infrared LEDs will turn on automatically, to provide
necessary light for taking pictures/videos. This makes it is possible to taking
picture at a distance about 3–20m without overexposing the night.
 However, reflective objects such as traffic signs can cause overexposure if
they are located within the recording range. In night mode, the pictures just
can display white and black. When record a video for long time in the evening,
the low voltage may have a great influence on the stability of the machine.
Attention: Do not record video with low battery voltage in the evening.

Using the wall bracket

You can mount the camera on a wall or tree by the supplied brackets. Use the
belt bracket to mount the device on a tree. The wall bracket is mostly used for
walls. You should ensure that all existing screws are tight. For both brackets
the best installation height distance from the ground is about 1 meter.
1.
Tripod screw
2. Lock nut
3. Pivot bolts
4. Drill holes
5. Screws
6. Wall plugs
Mounting the wall bracket
Required tools: drill, 6mm masonry/concrete drill bit, head screwdriver
Caution:  Ensure that there are no electric lines, water or heating pipes
installed at the proposed drilling location.  The supplied wall plugs are only
suitable for mounting on concrete or stone. Before starting the installation,
please check your installation location carefully for its suitability for the plugs.
The assembly material used must be suitable for the respective location. If in
doubt, consult a professional.
9