Renkforce 1377584 Bedienungsanleitung Seite 33

(13) IN button
Use the IN button to program the starting point of the playback loop.
(14) OUT button
Use the OUT button to program the end point of the playback loop or quit the playback loop by pressing it
once again.
(15) RELOOP button
Use this button to play the saved playback loop.
(16) SINGLE button
Use this button to switch the CD player between individual track (SINGLE) playback and continuous track
(CONTINUE) playback.
(17) REPEAT button
Use this button to select the playback function (REPEAT 1 / REPEAT ALL).
(18) TIME button
This button switches between the different play time display options of the display (Remaining track play
time > Elapsed track play time > Total remaining play time).
(19) PGM button
This button can be used to programme a track sequence of up to 20 tracks in the pause mode.
(20) Display
The display shows the most important settings and information of the playback medium.
(21) JOG/SHUTTLE wheel
Turning the JOG/SHUTTLE wheel searches a track, scratches or influences playback speed.
(22) Pitch Bend / Search / Scratch button
Use the button to select the corresponding function for the JOG/SHUTTLE wheel.
(23) REMOTE SENSOR
IR Receiver
(24) LED CD
The LED lights up when the CD has been selected as playback source.
(25) LED SD
The LED lights up when the SD connection has been selected as playback source.
33