Installation - Conrad 75 17 71 Bedienungsanleitung

7. Installation

Find a suitable mounting place from which the desired area can be observed. The
surveillance camera comes with a foot and can therefore be placed comfortably and
easily, e.g. on a table. However, the camera is also delivered with a wall mount
which can be used if the camera is to be installed on the wall.
A suitable mounting place for the camera has the following characteristics:
• as dust-free as possible
• vibration-free
• good air circulation
• no direct sunlight or other direct light sources
• dry indoor conditions
The surveillance camera and the wall power supply are not
weather-resistant. Make sure you install them in a dry environ-
ment.
None of the connecting cables should be bent or squeezed. This
can result in malfunctions, short circuits and defects in the
device.
Make sure you do not damage any cables or power lines when
drilling holes in the wall or fastening screws.
Proceed as follows to ensure proper installation:
• Hold the wall mount against the designated mounting
spot.
• Mark the drill hole positions using a pencil.
• Drill the mounting holes with a drill.
• Attach the wall mount to the wall using suitable mounting
material.
• Slide the camera onto the wall mount.
27