Safety Instructions; Description; Specification; Roadside Panel - Extel IRON NVC-4102 Installations- Und Bedienungsanleitung

1. SAFETY INSTRUCTIONS

Important !
• Please read the user manual thoroughly before installing or using this product.
• If you install this product for other people, please give the manual or a copy to the end user
Warning :
• The different elements can only be dismantled by an authorised technician.
Safety instructions :
• To safely use this system, it is essential the fitters, users and technicians follow the safety procedures described
in this manual.
• Specific warnings and caution symbols are indicated on the elements if necessary.

2. DESCRIPTION

1 •
Surface-mounted "camera" roadside panel with rainshield
2 •
Wall-mounted colour hands free monitor (without handset)
3 •
Fixing grid of the monitor
4 • 230V~ / 17 V , 1,5A
GENERAL INFORMATION
This video door phone is composed of a monitor with its modular adapter and a roadside panel. It allows commu-
nicating with the visitor who calls at the door and controlling the opening of the door and/or gate.
You can develop your installation by adding an optional additional monitor and/or a second roadside panel.
For a safe installation and use, please read carefully these instructions and keep them safe.

3. SPECIFICATION

a. Monitor
(fig. 2)
1. 17 cm colour monitor screen on which is displayed the visitor's face.
2. Turned on screen, communication with the roadside panel, a single pulse is suffi cient to activate the communica- communication with the roadside panel, a single pulse is sufficient to activate the communica-
tion with the roadside panel. Another pulse will switch off the communication and the image of the roadside panel.
Standby screen, Intercommunication with the optional additional monitor (MN IRON).// Allows you to navigate
upwards or to the left.
3. Resuming the image on the monitor with selection of the roadside panel "1" or "2" if the PL IRON option or
CAM ITOUCH option, are installed.// Allows you to navigate downwards or to the right.
4. Control of a strike/lock (valid only if the screen is switched on).// Audio and Video settings (only valid if the
screen is off) // Enter a menu // Read or Pause
5. Control of an automatic gate opener (valid only if the screen is switched on). // Exit a menu // Engage visitor
recording mode (only valid if the screen is off)
6. Enter the menu
7. Slot for Micro SD card (1GB recommended) Not supplied.
8. Microphone, to communicate with the roadside panel and the additional monitor.
9. Micro-switches
10. On-Off micro-switch
11. Terminal block to connect the wires
12. Speaker
b. Roadside panel
(fig. 3)
1. C-MOS camera lens with automatic focus, equipped with a lighting for a low-light vision (for night vision, use an
additional lighting system).
2. Speaker: allows to be heard outside.
3. Name holder and call button: when pressing this button, the internal and external unit ring, the camera and the
(fig. 1)
modular adapter
with its modular adapter and a roadside panel. It allows commu- with its modular adapter and a roadside panel. It allows commu-
CFI EXTEL IRON - V1 - 05/2012
GB2