Use; Unwind The Mains Cable; To Adjust The Telescopic Tube; Switch On The Vacuum Cleaner - Miele HS07 Gebrauchsanweisung

en

Use

Unwind the mains cable (dia. 10)
The lower cable hook swivels round.
^ Turn it upwards so that the cable can
be removed easily.
To adjust the telescopic tube (dia. 11)
(depending on model)
One part of this telescopic tube is
packed inside the other and can be
adjusted to suit your height for
comfortable vacuum cleaning.
^ Press the release button to release
the tubes and adjust to the required
height.
Switch on the vacuum cleaner (dia.
12)
^ Plug the vacuum cleaner into a
socket protected by at least a 10 A
fuse.
^ When vacuuming hang the cable
over the cable hook on the handle
(see detail).
This way the mains cable will not get in
the way during vacuuming. This also
takes the strain off the cable-entry on
the vacuum cleaner.
To switch on and off (dia. 13 + 14)
There are two separate switches on the
carrying handle to enable the vacuum
cleaner to be conveniently operated in
any vacuum-cleaning situation.
32
Double slide switch
0 = Vacuum cleaner is switched
off
min. = Reduced suction
Select min. for vacuuming
lightweight items such as curtains or
rugs.
max. = Maximum suction
Select max. if using a turbobrush.
^ To switch the vacuum cleaner on,
slide either switch to max. .
^ To switch the vacuum cleaner off,
push the slide switch to 0 until it
clicks.
To adjust the floorhead (dia. 15 + 16)
This vacuum cleaner can be used for
all normal cleaning of carpets, rugs and
robust hard flooring.
Miele offer a range of other floorheads,
brushes and accessories for other
types of flooring and special
requirements (see "Optional
accessories").
Please observe the flooring
manufacturer's cleaning and care
instructions.
Vacuum carpets and rugs with the
brush retracted:
^ Press the % foot control.