Preparing The Marine Pack (Installing The Battery) - Sony Marine Pack MPK-DVF7 Bedienungsanleitung

Preparing the marine pack (installing the battery)

1
Remove the grip.
Undo the screw on the bottom side of
the marine pack.
2
Insert the Sony CR2 lithium battery into the grip.
WARNING
Battery may explode if mistreate.
Do not recharge, disassemble or
dispose of in fire.
1 Remove the screw with the supplied
screw driver.
2 Insert the supplied lithium battery
(CR2, × 1) with the polarity
positioned correctly as indicated on
the battery case.
3 Fasten the screw tightly.
3
Unfasten the 3 latches and open the
marine pack.
If you lift the metal part in the direction
of the finder when the latches are open,
the latches will stop.
GB
continued
9
-GB